[. . . ] Next to the brand name you will find one or more 3-digit code numbers which have to be entered into your RC 8 remote control. Press the TV key on your RC 8 (for about 5 seconds) until the LED flashes twice. [. . . ] Aim your RC 8 at your CD-PLAYER and press the your CD-PLAYER switches off. If your CD-PLAYER does not react and/or it operates incorrectly, repeat step 3. If none of the 3-digits codes of this form operates your CD-PLAYER properly, use the ”Search Method” of your RC 8 remote control. Easy SET -UP to operate your TUNER The set-up to operate your TUNER is similar to the set-up procedures for your CD-Player. By using the TUNER/ SAT key on your RC 8 and reading the word TUNER replacing the word CD-PLAYER. Easy SET -UP to operate your TAPE RECORDER The set-up to operate your TAPE RECORDER is similar to the set-up procedures for your CDPlayer. By using the TAPE/ VCR key on your RC 8 and reading the word TAPE RECORDER replacing the word CD-PLAYER. Easy programming for the control of your AMPLIFIER To programme the remote control to operate your AMPLIFIER, proceed as described for the CD PLAYER. Search Method If the Easy Set-Up procedure was not successfully, try the Automatic Search Method on your RC 8 remote control: A. Make sure that 2 new batteries have been inserted correctly (see step 1. [. . . ] OK key on your RC 8 • • • • • • TV-Mode TV-Mode/menu VCR-Mode SAT-Mode DVD level TAPE-Mode Resets your TELEVISION to the basic settings. No part of this publication may be reproduced in any form or by any means without the prior written permission of SupportPlus Europe B. [. . . ]